Those Sole Accessories You Are Not Familiar With.

Jacquard band

It is usually made of polyester yarn, nylon yarn, PP line, PP material, polypropylene yarn, acrylic yarn and so on.

First, after drawing the computer, putting the picture into the computer jacquard machine and debugging the textile. The jacquard belt is also divided into warp and weft, which are woven by computer jacquard looms and vertical lines. Weft is woven from the transverse direction of the yarn through the jacquard belt.

　　 Jacquard band It is a fashionable and trendy ribbon weaving process, with a beautiful appearance and weaving beautiful patterns such as flowers, birds, fish, insects, birds and beasts. Brand jacquard, logo clearly visible, bright color, very high grade, not only can increase the added value of the product, but also enhance the brand image. The jacquard belt has fine pattern, soft handle, strong resistance, long wearing resistance, high color fastness and no deformation. The pattern of the jacquard belt is relatively simple and single, and the weft pattern of the weft belt is large and exquisite, and the color level is clear and the three-dimensional sense is strong.

The jacquard belt can also be divided into one side jacquard and double-sided jacquard. Double sided jacquard is a jacquard pattern on both sides. This jacquard is more beautiful and fashionable, highlighting the designer's design concept.

Purpose:

Often used in clothing Clothing, shoes and hats, high-end bags and belts, belts, belts, decorations and other industries.

　 Midsole

The midsole is a combination component produced in assembly production due to the needs of equipment and the updating of product materials. The rationality of the middle sole is that the appearance quality of the shoes is clear and the shape is beautiful, but the inner quality is not easy to be deformed and comfortable, especially in the bottom production. The middle bottom is composed of three parts: inner bottom, half inner bottom and center. The rivet and half inner bottom are riveted to reinforce the press, and then the edge is cut to the hard part of the last. Its length and width are in the semi insole, the center position is 10mm from the back edge, the front foot is 55%, and the middle bottom material can be regenerated leather or polyethylene.

　　 Foam cotton

The foam is divided into PU foam, antistatic foam, conductive foam, EPE, antistatic EPE, PORON, CR, EVA, bridge PE, SBR, EPDM, etc. it has the characteristics of convenient use, bending freely, super thin volume, reliable performance and so on.

Foam is divided into PU foam, anti static foam, conductive foam, EPE, EPP, flame retardant foam, anti-static EP.

Features:

1, low pressure very good shielding effect, shielding effectiveness is more than 90dB.

2, flexible and light weight.

3, anticorrosive nickel coating can prevent electrochemical corrosion.

4, low surface contact resistance.

5, fast pressure sensitive fixation.

6. Customer Length can be specified.

7, many cross section selection.

8, class UL fire prevention.

9. It can be sticky with the quality of the product. The product is stable, hot resistant, easy to peel off, and has high tensile strength. After the product is installed, the product can be maintained at low temperature -20 to 80 degrees C for 72 hours. It has a series of characteristics, such as easy to use, easy to bend, super thin and reliable in performance.